Please don't use image hosting services like Image Shack. Here's why. That's from 2009, and it still holds. The forum software is better than ever at uploading and storing photos, and it's easy.

Programming the sun visor garage door opener

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" cars.
2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R
warrenjoel
Posts: 4
Joined: Fri Nov 10, 2006 8:33 pm
Year and Model:
Location:

Programming the sun visor garage door opener

Postby warrenjoel » Sat Feb 21, 2009 6:56 pm

I replaced my 99 V70 XC driver side sun visor with one that has a programmable 3 button door opener. How, if possible, do I clone the code from my hand held garage door opener. Thank, Joel 8)

User avatar
VCA
Forum Member
Forum Member
Posts: 644
Joined: Fri Feb 22, 2008 2:28 am
Year and Model: 2008 S80 T6 AWD
Location: Orlando, FL
Flag: United States of America

Re: Programming the sun visor garage door opener

Postby VCA » Sat Feb 21, 2009 9:13 pm

warrenjoel wrote:I replaced my 99 V70 XC driver side sun visor with one that has a programmable 3 button door opener. How, if possible, do I clone the code from my hand held garage door opener. Thank, Joel 8)
Instructions depend on your opener. You'll be registering it with the opener, not cloning the code, so you might need a ladder to push the 'learn' button on the opener. See: http://www.homelink.com/home/home.taf
2008 S80 T6 AWD
1999 S70 GLT

Responsible for the care of a '92 960 and an '07 S60R

warrenjoel
Posts: 4
Joined: Fri Nov 10, 2006 8:33 pm
Year and Model:
Location:

Re: Programming the sun visor garage door opener

Postby warrenjoel » Sat Feb 21, 2009 10:02 pm

Thanks for info!

Can I instruct the a condo gate to register with my home link visor? I cannot seem to get the buttons to flash. Pressed two outside buttons while ignition at "on" position. Nothing...defective? Or am I the defective link?:) Thanks again, Joel.

User avatar
JRL
Longtime Member
Longtime Member
Posts: 8663
Joined: Tue Nov 22, 2005 9:07 pm
Year and Model: Several
Location: 19333
Flag: United States of America

Re: Programming the sun visor garage door opener

Postby JRL » Sat Feb 21, 2009 10:09 pm

warrenjoel wrote:Thanks for info!

Can I instruct the a condo gate to register with my home link visor? I cannot seem to get the buttons to flash. Pressed two outside buttons while ignition at "on" position. Nothing...defective? Or am I the defective link?:) Thanks again, Joel.


If you have a "rolling code" it's a bit more difficult and the garage motor has to be programmed.
If you do not, you program it to the remote
If you've pushed both outside buttons and held them for 20 seconds, they should flash, if not, the homelink is broke!
2000 V70R Black, 129,000 miles (Wife's R, getting up there, she won't sell it)!
2007 XC70 White/Oak over 100K perfect. New DD, sold the 06
2000 V70R Silver, 36,200 miles!!! SOLD (I will regret this)!

Contact info for purchases: jrl1194 (at) aol (dot) com

warrenjoel
Posts: 4
Joined: Fri Nov 10, 2006 8:33 pm
Year and Model:
Location:

Re: Programming the sun visor garage door opener

Postby warrenjoel » Sat Feb 21, 2009 11:55 pm

I think it's DOA. Thanks for the heads up....Joel


Return to “Volvo V70 & XC-70 (2001-2007), S60 (2001-2009)”

Who is online

Users browsing this forum: matthew1 and 24 guests