Bank 1: Indicates all cylinders on 5 Cyl. Bank 2: .. 6 cyl only things when i took a look or i read wrong place was as footnote on Volvo on with ME7. Maybe just ignore the Bank 2 readings.. ? Sounds.. stupid honestly but what i did find. ME7 is upgrade to M4.4 which supports that you can test each i...

Boring. 1999 CDM uses same address as 2003 V70 CEM. This will be quick addition to read fault codes, VIN code etc via app from 200x? year V70 CEMs and or reset with ELM327. No need any mods to ELM327. Or can use already "CDM" option in Scan to do this but it will show as "CDM" et...

Not exactly reading but included it as well quite much which i liked.. found out lately i have relatives in America through my grandma's mothers' father and still living. Thought first after all analyzing facebook being a dead platform as first place i found any still living relatives contacts was a...

Is the immobilizer unit the small box on the LHS of the steering column or the larger one above the LHS footwell? https://www.volvovancouverparts.ca/a/Volvo_1999_S70-25l-5-cylinder/_51513_5702581/Electronic-starter-inhibitor-immobilizer/GR-70680.html Is this #2 on the drawing above? Neil. Yes it is...

Use socks so no cold feet

Volvo literature uses 4/22 for Immobilizer and 4/19 for Remote controller (VGLA) Alarm box's Receiver unit top of Dashboard.. VGLA unit itself is 2/76.

Gonna collect them all.

I'll have to check to make sure it's seeing alternator voltage. Which pins should I probe to find this? I'm almost positive it is seeing it, because if I try to run the relearn without the car running nothing happens (forgot that step once) but with the car running it always flashes the AC and both...

"automatic transmission gearshift speed programmatically". I would wait like these happens in transmission module not in ECM. TCM sends example reduce torque signal to ECM but people who tuned M4.4 can flash more details what in ECM side as this was my quick take top of my head.. not in de...

There is now via update to 1.6.2 version in Service terminal (next to "SEND" button) if you write with up/capital letters "ECCUPDATE" and press SEND you get popup for possibility test Volvo's update procedure for these fault codes it might report if everything is otherwise ok in ...

Tried driving it again and relearning again, no luck. Still just flashes the AC on light (error), not the three lights together (relearn in progress). Blinking hasn’t changed, aside from it no longer doing the 3 light blink when relearning (likely because it doesn’t want to relearn). Did eccupdate ...

Volvo does say if its "Air distribution selector" is in AUTO position ECC will control some functions and tells to put it in any other position (for some reasons..). I have heard and asked previously is it normal if both passenger and driver move at the same time (or reports so). Though i ...