Search found 106 matches
- 12 Oct 2022, 19:16
- Jump to forum
- Jump to topic
Re: What did you do to your Volvo today?
I love seeing the recovery projects like bdubs Awd conversion and R to M56. Gotta feel the love on that one. I officially closed sea trials for the Kat today. A 5 hour run through the Bronx and Queens and out to Montauk. I’ve put 2000 miles on her and she pulls with great power and gives 27 mpg over...
- 14 Oct 2022, 15:57
- Jump to forum
- Jump to topic
Re: 97 850 with chipped key ignition?
We did not get chipped keys here until 1999. Before that there was basic system where if the alarm was triggered it would not start unless you reset via the driver's door lock. So no antennas until 99. The 06 XC70 we have has had the issue with the transponder chips failing. Had to get replacements ...
- 16 Oct 2022, 21:40
- Jump to forum
- Jump to topic
Re: Project 2000 S70 SE Base LED
. So many things but needed to tackle this. Was really in a hurry so the paint was really sloppy with runs and lint. . Even though the light was pretty bright the reflector coating was definitely bad. Imagine what the dim one on the driver's looks like inside. https://www.ebay.com/itm/284164823160?e...
- 23 Oct 2022, 06:25
- Jump to forum
- Jump to topic
- 04 Nov 2022, 02:17
- Jump to forum
- Jump to topic
Re: What did you do to your Volvo today?
We fought and slayed the dragon of transfer of PS rack parts… Aluminum heat plate Center mount Left plate mount Installed , mounted, then tightened the ps lines with engine out. I needed crows feet to do this , even with the engine out. Also managed to coat a headlight reflector with rustoleum silve...
- 04 Nov 2022, 07:41
- Jump to forum
- Jump to topic
Re: What did you do to your Volvo today?
We fought and slayed the dragon of transfer of PS rack parts… Aluminum heat plate Center mount Left plate mount Installed , mounted, then tightened the ps lines with engine out. I needed crows feet to do this , even with the engine out. Also managed to coat a headlight reflector with rustoleum silv...
- 27 Apr 2023, 04:40
- Jump to forum
- Jump to topic
Re: Vida CEM swapping
Here this is minimum connection to CEM on bench. https://www.matthewsvolvosite.com/forums/download/file.php?id=74839 On D connector: Green: HS CAN-L to pin 14 OBD White: HS CAN-H to pin 6 OBD Grey (pin 6 ): GND Yellow (pin 8 ): +12V Blue (pin 15 ): +12V Also it needs +12V on the both big connectors ...
- 29 May 2023, 08:30
- Jump to forum
- Jump to topic
- 31 May 2023, 12:38
- Jump to forum
- Jump to topic
Re: What did you do to your Volvo today?
Ouch, that took a hard hit. Glad to hear the driver is okay!
- 03 Jun 2023, 06:44
- Jump to forum
- Jump to topic






