I’m thinking you need a CANBUS sniffer or get someone with that tool to look at the traffic on the signals between DIM and ECU

Just scanned over the thread a bit, and while I may have missed some key details, what I gather is that you're having the starting issue that you stated in the OP, requiring a reset of that 15A fuse (or the battery possibly) before the car will start. I had strange electrical issues, as abscate post...

Did you get a tune done on thus car, or any evidence of one from a PO? The only other big news is that the tuner figured out where he went wrong, on these newer engine management systems there's an additional "motor identification code" that if it isn't copied right it trips the immobilize...

Is this one in good shape? Searchable ... pages in order?

bmdubya1198 wrote: ↑24 Dec 2021, 17:00 Here is a link to the 2000 P80 wiring diagram:

Is this one in good shape? Searchable ... pages in order? Here is a link to the 2000 P80 wiring diagram: https://drive.google.com/file/d/1QqurJ8wqmtl9LLbb21UZS4-R_POB9ZI2/view?usp=sharing Yes, it should be. The front contents page is linked, and it's in better order than others I've dealt with. I t...

RickHaleParker wrote: ↑25 Dec 2021, 16:12 Index is intact but the pages have been converted to graphics, all with the same name, then scrambled. That is why it is 21MB. Graphics are unsearchable.

They can't make it too easy

I will check the ETM butterfly plate, I doubt it is dirty, the car has only been driven probably less than 1000 miles in the last 3 to 4 years. When I originally installed it in 2019-2020 it was because the original white sticker ETM model 9186793 had failed, it was the original one, so the one tha...