vtl has mentioned dealer required to bleed air from ABS. Is that something we can do from vida? Curious about that. Absolutely. Trigger inlet/outlet valves of the line you're bleeding with Mityvac or vacuum pistol. 1.png Well, pumping a pedal may actually work as well. I just was doing it with a pi...

I inspected my struts, they're still there.
Good enough for me.

br0dy519 wrote: ↑03 Aug 2022, 05:27 Thanks. I really wanted those Michelin X-Ice snow, they’re well reviewed up here. Any good winter tire recommendations?

Put Falken Winterpeak F1-Ice on my wife Nissan Rogue last Fall and they were excellent on snow and ice. A little noisy but that is most winter tires as I understand.

You need 6 for the 3 banjo bolts. 2 coolant lines and 1 oil feed. Doh! Clearly I’m barely able to keep my head above water on this car project. Thanks again. recalling things i encountered, In prep, soak the 2 bolts retaining the heat shield on the back of the engine, the bolt with the spring may s...

Aren’t those codes unrelated to a huge vacuum leak though? Both of them infer to cat inefficiency? Someone smarter than me (jonesg i’m looking at you) please correct me. An Intake pressure loss richens the fuel air ratio, o2 sensor detects excess fuel passing through the system....it doesn't know w...

That video above that I used was made by these people, Automotive Circuit Solutions in Missouri.

https://www.automotivecircuitsolutions. ... 70~yr_2004

$170.

I put a new front wheel bearing on wife’s XC driver side. I think the issue may actually be the axle. The sound/vibration went away during swerve test but not gone completely. There was some in/out and lateral(?) play on the axle at the gearbox portion of the CV. I’m gonna pay my mechanic to test d...

PBR=good
Natty Ice=bad

Don't do bad things.

Drink responsibly, and be safe working on whatever it may be.

So hard to tell on those wheel bearings, I just went through this and replaced both of them. FYI I found the best price on FAG's at RockAuto.