Try the simplest route: swap only the display cardboard with a US one. Check out Youtube how to remove the glass, then the needles, then the cardboard itself. From what I've seen, the speeds in mile and km are quite a the same place when the needle points at any speed, but double check to be sure. D...

Thanks to jimmy the expert here on this firum, this knowledge is present here ,and , yes, this is by design. This protects the compressor from pooled oil by dispersing it before loading the AC compressor fully, It’s a P2 feature , I think it’s because of a change in the AC design from COTS To valve ...

If the belt is moving left-right on the cam pulleys, it's a problem with the tensioner. I'm not saying it's really bad, but worth replacing it. My belt was also 'walking', after replacing the tensioner is now steady. Also, the belt should be sitting about centered on the cam pulleys, not near the ed...

I never got an answer to "why?", but in my many talks with IPD/Ken Pruett they don't do the softloader program anymore. They do the wireless tunes/Gluon module nowadays. I don't know if they ship to OZ, but worth asking. I've done 3 of their wireless tunes with great success. I've not trie...