Here...

2 options, connect the 5V line at the capacitor, or connect the 12V at the CEMs main connector. Both connections 5V and +12V are not needed together...

Masse means GND
If you use 12V power supply connect GND from it also to arduios GND, so they should have common GND.

This commercial tools are based on work from this open forum. Isn't it strange all tools came on marked shortly after this project was visible here. Now you blame us that we don't develop so fast like the guys which get 4600 $ about their full set. I think VTL and I did this just for our own cars, w...

Here, who has 6 byte code, CEM from MY2006- and DICE-206751 absoloutly FREE...
Reads your cems complete flash in a few seconds...

https://filetransfer.io/data-package/bsTYjdGO#link

first 6 bytes at 0x4000 or first 6 bytes at 0x6000

As far i know only the early modules support more primary bootloader functions, later they reduced them more and more and put the functions into to the secondary bootloader. The only other module i know that supports writing function in primary bootloader is the early CCM...

Hello, Im sorry there's way too many pages to catch up on, I've probably only been through 40. Is there anyway to CEM pin crack with software only? I have a 2007 XC70. I have a Dice cable, a regular USB to OBD cable and a laptop with Vida. Im not super fluent with the super techy stuff thats been p...

Sorry was 50 downloads only, here are both again...

Also Windows 10 doesn't notice me about anything, maybe it is location based on 3 computers i get nothing. Maybe defender in US sees something problematic in this code...

BKPT to D4
RESET to D5
FREEZE to D6
DSI to D7
DSO to D8

it talks now, but the PIN I know as good, as I sent it to D5T5 and it works in VDASH to change settings in the CEM, isn't working. 2005 XC90 V8 The CEMs have 2 codes, the long 6 byte code you can crack by teensy, or the 3 byte UDS code you can crack by dice. Both codes are different but have the sa...

This reads flash by 6 byte code: