Search found 17 matches
- 23 Dec 2020, 11:23
- Jump to forum
- Jump to topic
Re: Vida CEM swapping
Add it back and make it switched then?
- 03 Jan 2021, 08:41
- Jump to forum
- Jump to topic
Re: Vida CEM swapping
You need to talk only to CEM, on a fastest bus. Thus one CAN-bus is used. The in-car cracking would need to silence everything else, so there's another CAN controller, but it is optional and only used to hush the modules on the slow speed CAN.
- 13 Jan 2021, 06:58
- Jump to forum
- Jump to topic
Re: Vida CEM swapping
Nice! ;) Zener diode is for safety. As said elsewhere, I was rebuilding my blown engine. It is up and running now, but I need to pass a long overdue yearly inspection, for which the car should have no codes erased for last 100 or 200 miles (erasing codes zeroes emissions readiness). I'll try it in c...
- 14 Jan 2021, 20:30
- Jump to forum
- Jump to topic
Re: Volvo XC90 MY2009 BPM (Bluetooth Phone Module) integration
After Install. You would need to get Yagger to do some reprogramming. He is in California buy if you have a DiCE unit and the two of you can setup a time he can do the programing over the internet.
Yagger might have a commercial customer in Germany that you can take it to.
Yagger might have a commercial customer in Germany that you can take it to.
- 16 Jan 2021, 12:11
- Jump to forum
- Jump to topic
Re: Vida CEM swapping
I can't be of any help "testing-wise", I still need to do some other things before I can even think about ordering the parts. But if there are language barriers between english and german, I'm happy to help! :) @efe09 Wenn Du Probleme bei der Übersetzung hast, kannst Du mir gerne Bescheid ...
- 28 Jan 2021, 23:23
- Jump to forum
- Jump to topic
Re: Vida CEM swapping
Here is the other version. Also on github: mdapoz /volvo-cem-cracker
- 16 Feb 2021, 15:05
- Jump to forum
- Jump to topic
- 25 Feb 2021, 15:47
- Jump to forum
- Jump to topic
Re: Volvo XC90 MY2009 BPM (Bluetooth Phone Module) integration
I have a spare ICM from a 2012 '90. Knowing that year had BlueTooth as standard the software for it may be stored in the ICM (it could also be stored in the Amplifier though, I don't know.) If you want to PM me your address I'll send it over and you can give it a try. I have no use for it as I've al...
- 02 Mar 2021, 20:54
- Jump to forum
- Jump to topic
Re: Vida CEM swapping
Alright, time to try it myself in-car. Wife's XC60 is repaired, XC70 comes to stall. I'll report back when the problem has a fix in git.
P.S.: I'll be using built-in CANs from now on (no MCP).
P.S.: I'll be using built-in CANs from now on (no MCP).






