Over the years I've done a few TB's on 240's and 740's, also one on a Porsche 951 and a Porsche 928s. The job doesn't intimidate me at all... but I'm almost 60 now. Rolling around on the ground in Minnesota-- it was sunny and 32 -- was just more stress than my body liked. And it was one of those day...

The timing belt is installed, and I think it's right. Car idles and revs fine, I let it sit and idle up to full temp while I cleaned up the 35,000 tools and pieces of debris that were scattered everywhere. I had let the thing sit overnight with a fresh coolant fill, and no signs of leaks before I co...

The day after I bought the car last week, the remote stopped working. Replaced the battery, no dice. I thought maybe I'd unhooked some wire or something with all the messing around I've been doing. Couldn't find anything though. (One nice thing about this car, although it's been some neglected, it h...

Hi, I am converting a 1998 V70 (base) to fell electric, using a forklift motor. I am mating the motor to a manual transaxle from an 850. The V70 has an automatic, which will be pulled out with the IC engine. Question: what CV shafts will work in this application? Re-use the ones that are there? get ...

Thanks all. Electric PS pump it is.

The engine is out. I had to remove the axles. There was no way it was going to come otherwise.

90 degrees and humid here in Minnesota. It took me about 4 hours.

I lost 3.6 lbs. in that time.

I think I need to hydrate.

Yes, I'm going to wait until I''ve driven the finished car before doing anything. Ride height is not critical path right now...