excellent cracker, now with new code P1 work too

I didn't try internal, till now i'm happy with mcp, we only measure time between sending and receivng. I think the signal quality and how long the messeage stays on the can bus is the important factor. The 3,3V powered can transceivers have it hard to create a differential signal which could reach u...

Who still searches his pincode and has a P2 car from model year 2006-

Just a DICE-206751 is enough to crack pin and dump full flash without any risk.

(or 2005- CEM with series number starting by 0000491...)

At the moment i give hints to get the code by pm or someone else uploads it here, i won't do that...

Here this is minimum connection to CEM on bench.

On D connector:
Green: HS CAN-L to pin 14 OBD
White: HS CAN-H to pin 6 OBD

Grey (pin 6 ): GND
Yellow (pin 8 ): +12V
Blue (pin 15 ): +12V

Also it needs +12V on the both big connectors (big green power socket)

Here have fun with it: #define BKPT 4 #define RESET 5 #define FREEZE 6 #define DSI 7 #define DSO 8 static word CMD_READ = 0x1940; static word CMD_GO = 0x0C00; static word CMD_WRITEM = 0x1840; char command; int n_line; void setup() { // put your setup code here, to run once: pinMode(BKPT, OUTPUT); di...

Just a reminder that MVS has Terms of use: https://www.matthewsvolvosite.com/forums/ucp.php?mode=terms "You agree not to post any abusive, obscene, vulgar, slanderous, hateful, threatening, sexually-orientated or any other material that may violate any laws be it of your country, the country wh...

Thanks all for your help with this. Just posting this, adding to the work that Dudde and T5Luke have been doing so far in mapping the parameters. Not sure if this is entirely correct in places but the majority does seem to match up I think (to my vehicle anyway). Unless the mapping has different val...

Here you go: https://modunlock.com/wp/ £225.00 for 1 pin crack? o_O I hope the guy with MVS session id 750e9c72f03b40c7abcc29a8381d7316 contributes his share to MVS for our hard - yet free - work, so @matthew1 can pay for his server.

CEM Data Manager.jpg I made this long ago for my self. It works, for me and i hope for anyone who needs it to copy his own CEM. For just changing config, better take the other tool and write only the config to your cem by dice... https://www.matthewsvolvosite.com/forums/viewtopic.php?t=85611&st...