Holy mackerel Crasbe. I was trying to figure out exactly what I was looking at and then clicked the link. That’s some project you’ve got going there. Best of luck and have fun with that. Coincidentally just bought the kick panel repair piece and some lock button bezels off your Etsy site yesterday. ...

Decided to tackle the numerous interior noises: first step, the cargo area. The cracked speaker trim has been reglued and i've given a go at 3d printing new clips to replace the broken ones that hold the upper trim https://i57.servimg.com/u/f57/16/41/73/43/2024-014.png At this price i can waste some...

Thought you guys might enjoy my tape player repair. The entire time I’ve owned the car, when you would insert a tape, it would just continually try to flip the tape without being able to play it. After a tear down, I realized the band was snapped, and two gears broken, one new band and 2 printed gea...

Do you plan to publish the gear model? It might be useful for other people as well. I personally like Printables ( https://www.printables.com ) and have published my models there. https://www.printables.com/model/980593-volvo-850-sc-710-radio-gears Here's a link, I've stayed away from posting most ...

https://i.postimg.cc/cC0FzG8b/hex1.jpg https://i.postimg.cc/RVPgg8Cg/hex2.jpg https://i.postimg.cc/wjZ0pmmJ/ident.jpg https://i.postimg.cc/3NtFb4hk/ident2.jpg CEM_B_XC70_HW08688513_08696035_28F400B5_stend.zip Thanks for the reply. Yes, I do swap the large and small sequence numbers, but if I had ma...

Thanks again for doing this for the Volvo community! Thanks to Skandix too for their efforts. It will be interesting to see how this works out. I recall my brother having an 850 many years ago where the bush separated from the steel. At that point Volvo offered a replacement bush and clamp, but it d...

Hello. I have been studying CEMB until 2004. Does anyone know how Vida rewrites the configuration area when it is necessary to change the vehicle configuration? The configuration area of the 28f400 flash is the 8000 - 20000 hex addresses. This area contains identification data (8000), configuration ...

And I'm attaching a CEMB dump.

crasbe wrote: ↑16 Feb 2025, 15:24 I live close to Hamburg, Germany and have never heard of "Hamburg-Technic" before. They seem to be mostly/only sold in the US, so most likely they are not from Germany and it's just marketing :/

Yes, Chinese garbage with a German name.

Hi everyone, I'm new here. Just wanted to thank you both Blacklab467 and crasbe for your work guys! I used a mix of both solutions -> fat allen key between subframe and frame, jack to push up and 3D printed tool to make the job easy and protect the bushing. All 4 bushings were fitted super fast. It ...