True, checksum is simple 8 bit checksum of the block, starting from 0x8102 with block lenght, which is at 0x8100

But anyway, if you need biaries from any volvo cem, let me know. Or other questions, just pm me. I know something a little bit

I have a lot of p3 bins. I do not know where then pin is located - there was no need for me until now to analyse it, but I can extract pin from flash in other ways... If you can, figure out the location of the PIN in .bin. Then parse the .bin files to extract the PINS. Publish the list of PINs. Per...

Tonight I had nice time looking thru almost all P1 files I have. Strange, but only those HW PN are in my collection. HW PN, BIN PIN, PIN 8690719, 313645345203, 034536523134 8690720, 546199294020, 209961405429 8690722, 570845684655, 554508465768 30765015, 347164281322, 226471133428 30765471, 83900414...

gnalan wrote: ↑15 Mar 2022, 13:19 Has anyone tried this on the CEM-B to read the eeprom to get the pin from the .bin file?

This one https://www.usbjtag.com/jtagnt/ulinknt.php is working very well without desoldering of flash chip

I haven't taken my CEM apart, or any CEM, so I don't know exactly what's inside. How are the connections made? For $65 that doesn't seem to be a bad price to get the CEM pin. Thanks for the info. It is very easy - all info you can find on their forum https://www.usbjtag.com/phpbb3/viewtopic.php?f=2...

IO terminal has no function to read/enter PIN foe CEM-B. As I wrote before, the flash of 29f400 has to be modified/patched either with io terminal or manually. The "patch" is simple replacing of original pin with FF. The pin is located at address 0x4000 or 0x6000, depending on cem version....

As far I know, there is only checksum for config block, not for whole flash

oscilloscope wrote: ↑11 Jun 2022, 11:59
probably would help if i where to look at the correct file

It seems my repaired alarm siren is again leaking and again draining the main battery. I want to throw it away, the car is never locked anyways. Don't what to see the immobilizer warning message on every start, though. What are my options? Is it a bit toggle in CEM's car config? I may have finally ...