Just shy of 313k miles on my 2004 XC70. Re-Volv catted downpipe, deleted stock S60R catback and tune by IPD. Daily, I am amazed at the power this 18 year old, practical, relatively unattractive, beige station wagon still has! By the way, it’s not as loud as it seems on camera. The only time I hear t...

Installation went beautifully ! I can say that the O-ring can be installed without pulling the water pump. As long as the end of the pipe is tapered. I also slipped the O-ring on the pipe and left it that way for a couple of days to help stretch it some. When I was ready to install, I took it off th...

Today was a trip to haul tree and bamboo brush from my home to my acreage. The trip was in 1976 Ford F350 with 16 foot flatbed trailer and as much brush as I could tie down on both. The trip was loud (460 V8 exhaust is open and about 3 feet long under the cabin), slow (top speed about 35 MPH to keep...

Long-term report four (4) years later, the 2 screws still work fine. Zero issues.
FREE mod...

:lol: BB, php goes between the Web server (software) and the database. I could make a thousand analogies, but it's just the middle thing of three thingies. It uses the data from the database and cooks it up into HTML that the Web server software sends to you and your browser when you request a page...

You can go to the extreme of removing the angle gear as well and leaving the collar in place. Some have done that with hose pipe clamps. That way you will get rid of basically all of the AWD driveline. You can go even further as our friend bmdubya did with his V70R and remove the whole rear sub-fram...

Oly850 wrote: ↑16 Feb 2022, 09:50 Oh Man, I’m in NE Ohio, is the S70 still around? I’d definitely be interested in towing it home and fixing it all up!

It is still available. NE Ohio is probably a solid day of driving away from here. Ask as many questions as you need to make it worthwhile for you.

scot850 wrote: ↑16 Feb 2022, 14:35 You can go to the extreme of removing the angle gear as well and leaving the collar in place. Some have done that with hose pipe clamps. That way you will get rid of basically all of the AWD driveline.

Extreme!

Salut Matt, Hy Guys, To me, Matt, send me a PayPal request about 10 $ and i will be happy to put back the monthly payment from 1rst march. On your pink board, on the top of the page, you've written " Like everybody, I have to put food on the table for my son and me ". Any suggestion for m...

I have 24 Nm in my notes for both banjos. I looked in Alldata to confirm but could not find it. Someone with VIDA running can confirm Use new copper crush washers and clean all the surfaces carefully to get a good seal. If you replace the banjo bolt, make sure replacement is identical in depth to or...