Hope this helps someone else. I bought a clone dice unit off e-bay.. Using the standard VIDA instructions as found elsewhere on this site.. I could not get the DICE to show up... No matter what I did I could not get the device driver to load... It turns out that these units are using Scanmatik 2 PRO...

I took the seat out today, to see if the job looks doable as well as see if I could find damage or confirm a loose joint. It isnt obvious how the mechanism works, but I was able to get about halfway through the R&R procedure before satisfying myself of both objectives. I found looseness at what ...

Hello everyone. I'm new here. After 7 years of owning an S80 I decided to upgrade my car. I gave my old model in trade-in and chose V90 Cross Country. The car is equipped with everything you need: safety, practicality, excellent visibility, winter package, mechanical adjustment of seat cushions, rea...

Got a call from my trusted workshop, i got the "Abgasuntersuchung" without finding any fault, since there seems to be none... Fun fact, i found another guy here in germany with the same symptons on his R, not getting any TÜV, he gave the car to Volvo where he was TÜVed without faults... I...

Does anyone know how *exactly* air mass is calculated inside the ECU based on the voltage from the MAF sensor? I've just had a datalog where momentarily the MAF value pegged to 8191.88 (aka the maximum of the 16 bit number it can be), which resulted in a load-request of >10ms at idle with a subsequ...

Thanks Matthew, It took a while, but I did find them at that site. They are listed as "six point socket screws" at $2.87 each without much detail. It does appear that they do have a screw thread rather than a "machine" screw thread. And for the record, the belly pan is called a &...

yes, it was the starter lol

If it helps anyone, I have copied as much of the tuning information as I could and put it in this Google drive link. Collin, Chuck, and John have contributed much to this effort and thanks guys! https://drive.google.com/drive/folders/1gWqxA4PLPvgNXz_fZvUfaSJZzznsR-eq You may add your own files, plea...

I think what would be super helpful would be a start here type howto document we could put in the files repository. What ECU to buy, what software to download, what pins to jump in order to initiate boot mode, info about battery level needing to stay above 14v or whatever, etc. also what the bin fil...

My other car is also swedish, it's a Saab 900. It does get used as a car should