Yesterday I welded in the patch and ground down down the weld. There are probably a few things that still need to be welded that I thought I would do after I got the main piece in. I can feel some distortion on the panel above the patch, going a bit wavy, I can't see it though, I've been using hamme...

Oh geez. It’s a ‘98, it’s rather simple. First off, PCM isn’t terminology used by Volvo or people that work on them, so that tells me his experience level with these things. Second, if the guy is probing stuff for power before doing simple checks, that confirms to me that he has absolutely no idea h...

This may be documented elsewhere, but wanted to provide a warning of how quickly a leaky heater core can progress. Although the typical heater core leak may be a slow drip, it has the potential to be a source of massive coolant loss, as happened to me. My 1996 850 had a slow heater core leak (a few ...

Im guessing it was an end cap failure that did this? If you can , please post pictures of the old core so we can see the gory details

Got myself a mighty sword that adds 10hp when equipped.

'52-'67 Prince Skyway was based on the Skyline sedans, made in several versions including what we would call a Sedan Delivery, before the merger with Nissan. Prince_Commercial_Van_AIVE_.jpg https://www.facebook.com/groups/1712630748969016/posts/3984868118411923/ This version must be rare, it's the o...

Being a 98 European spec car, does your car have a chipped key and an antenna reader by the ignition key? They key is larger than the non-chipped key and thicker. Does the car have a spare ignition key? If so have you tried that as well? Try, locking and unlocking the car door with the key 3 or 4 ti...

.
Extracting A Broken Bolt
.

.

I saw this minty XC a couple miles from my house a few months ago, it was on a driveway with no plates or it. Last week I knocked on the door to see what the story was on it and if it might be for sale. The guy bought it a few months ago for his son and shortly after, his son got a job that included...

Today, after replacing the brake master cylinder en front brake discs on my 2001 C70 T5 and (of course) bleeding the brake system I went for a test run to check the work and bed in the discs. Everything was A-ok however, close to home as I was returning, which is up a steep hill, I decided to give i...