Thanks for documenting that , Chuck.

OP, be sure to put 50p into the slot on your computer.

Big change in our house. Retired the natural gas stove and replaced with a beacoup bucks LG induction model. Had to pull 50 feet of AWG 8 and wire in a 40 amp breaker and outlet into the kitchen , tough on the hands. Folding AWG 8 isn’t fun, especially in a crowded fuse box First impression using st...

First oil change today
M6 10mm bolts for engine tray
17mm for drain plug
36 mm for filter housing release cap

Just do one. Technically you should reprogram the HVAC for the filter of choice , you can get away with moy]t doing this in the cool NE, you might not get good AC in Alabammy!

Jim warned me about this when I bought my P2 from him in 2014

The AWD drive fuel pump design relies on a pressure fit between the pump and receiving nozzle on the pump housing. I didn’t feel good about it, but my new pump held and now has 25k on it. I did add a zip tie on the mount to help keep it together.

You are connecting a circuit internal to the charger when you clip up, even if it isn’t plugged in. A spark is normal

P1332 is not a knock sensor code. You have to be careful with code readers and any code thst is manufacturer specific, the text is usually incorrect. The manufacturer specific codes are formatted P0XXX , text descritions for any code P1XXX or P2XXX are suspect The cam flank error code presents on st...

Caption:

Heathcliff!

Cathy!

Or….why day drinking is bad…

BlackBart wrote: ↑11 May 2025, 08:31 Only to cover the address - it was handy..


Brute Force Automotive…….Inc.

For want of a hammer , the mail was lost…..

I’ll see myself out…

can invest a fair amount of time, but I have no experience with body work so I'll be learning as I go. My husband will be helping and the cats can look after themselves for short periods of time.

Idle cats are the Devils minions….