When the wheel attachment bolts are tight, there should be no movement of the brake disc with out the small alignment pin. If the disc is moving during braking, retorque the wheel bolts.

volvolugnut

I really enjoy these road trip stories. Thanks June.

volvolugnut

bitly is a URL shortening method. I will stay far away. Note the Year and model is Chevy 2012. Also poor grammar.

No free lunch.

volvolugnut

There is nothing complicated about a fuel pressure gauge. An air compressor tank gauge (0 to 100 psi) borrowed from an air tank will read what you need. Remove the valve from the schrader valve and connect with rubber hose and hose clamps. Be careful to have no leaks. No ignition source or flames. D...

I understand your frustration. When things go bad, it is sometimes hard to get everything corrected again. In the case of the hard plastic fuel lines, once they are kinked, it is hard to get them round again. Perhaps some mild heat can get the kink out of the tube. Maybe there is a replacement tube ...

Since I have driven 240 Volvos since the 1990's, I can give some suggestions. In no particular order: Door map pockets - they break. Outside door handle assembly (LH and RH). Good seat springs and upholstery. Window scraper rubbers if good ones are found. Fuel pressure regulator. Fuel pumps (externa...

I think that's great. None of my 240's every had working AC. Enjoy your vintage wagon.
volvolugnut

For background, please see https://www.matthewsvolvosite.com/forums/viewtopic.php?f=4&t=94509&p=550175#p550175 I have a 2001 Volvo S60, base model, and I could use some help with getting parts. My fiance has cancer, among other health issues, and goes 3 times a week to see her doctors (each...

Bare strut only available with spring cushion. Installation may need other parts that I do not have. Spring? Soft top cushion, boot, bearing plate, hardware needed?
volvolugnut

You would need a good spring compressor. Not a cheap one - they are dangerous. Is the spring broken? It is hard to tell what else you need until it is removed. Do you have tools or someone to do this work?
volvolugnut