I don't know the resistor needed, but you should be able to calculate if you measure resistance of incandescent bulb and LED bulb. Then calculate the resistor needed for either series or parallel load resistor to add.
volvolugnut

abscate wrote: ↑19 Mar 2025, 00:08 Anyone still posting at 11pm is just looking for trouble, anyhow.

Says the guy who appears to make posts all night............
LOL
volvolugnut

I have had a lot of fun over the years making shiny new parts look old and grimy.
volvolugnutr

This is typical failure. If you plan to keep this vehicle a long time, consider replacing the entire fuel pump while you have it open. Then you have no fuel pump worries for a long, long time.
volvolugnut

To run an engine must have fuel, air, compression and a spark at the proper time. SInce this engine had been apart, you need to confirm everything. You have spark, but do you know if the spark is at the proper time to fire the fuel? Use a timing light to confirm ignition timing and check that the pi...

You may consider adding some Instant Shudder Fixx. Link is here:
https://lubegard.com/products/isf/
I do not consider it snake oil. I added after my long term fill and drain.
volvolugnut

As I have said many times, here in the wild west (Oklahoma) anything goes as we have no vehicle inspection program.
But if you purchase a vehicle from another state, the VIN must be confirmed before you can get a title.
volvolugnut

Somehow I am reminded of Smokey Yunick's Best Damn Garage in Town.
volvolugnut

If you purchase a radiator with plastic necks, get one with metal rings inside the neck to prevent clamp crushing.
volvolugnut

Yes! A tailgate and digital clock!
volvolugnutr