Finally let go of the S70 today. Traded it for another Subaru... that's the second one I've acquired in the past week :lol: It went to a Volvo enthusiast who has an XC90 V8, and has had many other Volvos. I'm more than happy to see it go to a good home where it will live on as a daily driver, exactl...

Woohoo! Glad it was that "easy".

Just scanned over the thread a bit, and while I may have missed some key details, what I gather is that you're having the starting issue that you stated in the OP, requiring a reset of that 15A fuse (or the battery possibly) before the car will start. I had strange electrical issues, as abscate post...

Is this one in good shape? Searchable ... pages in order? Here is a link to the 2000 P80 wiring diagram: https://drive.google.com/file/d/1QqurJ8wqmtl9LLbb21UZS4-R_POB9ZI2/view?usp=sharing Yes, it should be. The front contents page is linked, and it's in better order than others I've dealt with. I t...

RickHaleParker wrote: ↑25 Dec 2021, 16:12 Index is intact but the pages have been converted to graphics, all with the same name, then scrambled. That is why it is 21MB. Graphics are unsearchable.

They can't make it too easy

So when you say " tucked ", do you mean that you mount the fan to the inside of the shroud instead of where it normally sits ( bolted to the outside ) ? If so, does that improve the cooling ? Correct. It's mostly for space savings, I'm not sure if there is any difference in cooling abilit...

I believe that is the correct orientation, yes.

There is big combo of washers and o rings to install these, along with those yellow clips. I always bypass that junction box anyway, so they never go back in. The box is too fragile to not replace. I've broken most of them that I've messed with.

Find a random dumpster around town. Works every time! ...in all seriousness though, most places would probably prefer that it's been deployed. I can understand why you wouldn't want to do that though, I wouldn't either. I believe some scrap yards accept them as hazardous materials, but that depends ...

The PN for the water pipe o-ring is 30622784. The gasket is 1236119.

hi all today i did an gearbox oil change on the 855 it was not real dirty looking and no metal bits around however the gears are stiff when you first start driving and loosen up to normal after a few miles i know the linkage is via cable can anyone tell me if these can or should be lubricated ? als...