Clemens wrote: ↑05 Oct 2022, 04:24 inner tie rods? the rods where the outer tie rods are mounted on?

Correct. The pieces that are partially covered by the rubber boot.

I believe the CDM would be what you're looking for, there is no CEM on P80s.

I did get dropping the whole AWD subframe on a P80 in a junkyard without breaking anything other than possibly rusted sub-frame to frame bolts, to about 2 hours without power tools. Now if I had a high output cordless impact driver.............! That included disconnecting the propshaft. Neil. This...

Best kept secret for turbos: https://www.turborebuild.co.uk/

I ordered a CHRA from them a couple years ago for my V70R, was under $200 shipped. Can't beat it!

I believe this is the 19t for the 2000 R https://www.turborebuild.co.uk/webshop/ ... -Core.html

You have to find them by part number, I usually find that with VIDA or one of the parts sites.

Speaking of weather, we have a nice 8" of snow out there and the temp is dropping. I'm just glad we live on the western slope away from that painful blue Canadian air! It's not conducive to outdoor fixits! So, in starting up an 850 ('94) which has been sitting in storage for a while, the heate...

Yeah, that radiator is about to burst. Definitely replace it ASAP.

I can't remember if they were regular nuts on top or some awkward shape (which they always are once corroded, but either way...) but you might be able to fit a twist style extractor socket over it.

Is that like one of those “Gator” multi-size sockets? I almost got one today. The Gator is the socket that looks like a spark plug socket filled with pins, right? I think he's talking about something like this: www.amazon.com/IRWIN-HANSON-BOLT-GRIP-Extractor-394001/dp/B0000CCXVZ I picked this one a...

Sounds like you don't have enough power.