I just don't like the rubber 'O' ring on the newer paper element plastic cup. It is way too easy to snag the ring. I lightly oil the ring and just turn it slowly and if I feel any binding stop and let the 'O' ring settle and then continue. So far so good, but not something I enjoy. With the metal o...

Under trays were only fitted to diesel engine cars in Europe, as far as I'm aware there were never fitted to petrol cars. I fitted a used one from a diesel car to my 850 a few years ago, at the time they were still available from Volvo part number 1397236

The other 960 wagon that sold on BaT about the same time made $3k. This guy is suffering from Barrett-Jackson Syndrome. Watch too many high-end auctions and your ride becomes priceless. BaT is a virus for people who think they're junk is worth millions. People don't seem to realize that their cars ...

So a couple of weeks ago I bought an intake manifold spacer, thinking that it would be a good modification. Turns out that I might have been wrong about that. It's a 1/2" thick, so I thought I might ask the tuner I've been working with, if that would make a difference since all 5 runners would ...

16x7 Volvo wheels. #8698504? Virginia Beach area.
https://shopgoodwill.com/item/187900562

Race cars don’t have center caps.

The issue I have in front is that the threads for the axle protrude past where the center cap would go by a good 8-10mm. It seems there have been similar issues reported on the forum and the cause was stated to be because there's two different axle mounting types, one using a bolt and one using a n...

Getting around to buying 2 gallons of ATF for a Gibbons method, but now I realize, is it a PITA to fill because you need to go through the dipstick tube? Do you just get a funnel attached to a hose and wait, or is there a smarter way to go about ii? Yes on the dipstick tube, there are long tapered ...