I carefully use a small drill bit to predrill the holes to prevent breaking the plastic. You could then use JB Plastic glue and reinforce the repair.

Neil.

Eat, sleep, collect dead cars.
What could go wrong?
volvolugnut

Are you getting 12V to the starter post or 12V to the small green wire pulled off the solenoid spade connector?

Or, both, with Key in KPIII (cranking position)

You’ve got a bomba in your gas tank...

Damn kids and their music.

I used to love tacobucksmart until they stopped making the 3D printed poly burritos.

Finally figured out the excessive blow by in Honey Badger, caused by a faulty EGR solenoid. Formerly 94TurboMom (Tiana's) car...given to my wife and I as a wedding present for us to fix up together. Really loving this car

Volvo did an outstanding job on the 850 design, and the C-pillar on the sedan is no exception. It's very, very good. The 700 series 4-doors' C-pillar design looks a little awkward in comparison. Another high point in 854 design is the trunk and taillights. Both are about as perfect as design gets, b...

Too many deer strikes, let’s all be careful and try to buck this trend.