What is your contact clearing method? Spray and wiggle? MAF cleaner or electrical contact cleaner. Scrub with a Acid brush . Bristles cut down so it is stiffer. Use Dental Interdental Brushes for the tight spaces. https://www.gumbrand.com/pub/media/catalog/product/cache/0555a4b9215a328902cb9ab7c92f...

Standard H11 wiring harness. Google "H11 wiring harness" You can get replacements all over the place. NASA splice the new ones on.

E Showell wrote: ↑13 Jun 2020, 04:12 In the three throttle bodies I pulled at Harry's, I utterly destroyed the clips to get them off. Could not for the life of me loosen them for removal.

Spray them with WD40 and let it soak down in between the two plastic connectors. Most of the time they slide apart afterwards.

- I saw a sign by the protesters the other day in the news which read "Silence Is Violence". They came first for the Communists, and I didn't speak up because I wasn't a Communist. Then they came for the Jews, and I didn't speak up because I wasn't a Jew. Then they came for the trade unio...

clarkerussell wrote: ↑17 Jun 2020, 16:10 are there any other choice pieces I should be looking for?

Get the subframe brace from under the car and install it on your S70. It will stiffed the S70 up.
If you don't want it some 850 owner will.

Racism and tribalism and them-and-us and "others" begin very early. I believe they are mostly a learned behavior. The motive behind all forms of discrimination is the same. People or incorporated persons trying to get something without having earned it. If one does not let themselves get ...

I think it is possible to crack the ID code in those Renesas-equipped CEMs using a cheap, but mighty MCU board, like ESP32. It has been done. There is a program out that will calculate the CEM pin from the bin file. The link below is a program said to calculate the CEM pin from a 2005 - 2009 Volvo ...

Yeah, seen that. I don't really understand what this software does. It gets the pin number needed to make changes in the CEM. Like software reloads, cloning ... ect. Yagger can get the PIN through the OBDII port but like all the other services the CEM PIN is not shared with the customer. It is used...

It would help if you post the part number on the alternator. 180A Volvo part number 36012382 supersedes 31110085, 30644805. 160A Volvo part number 36050269. 150A Volvo part number 36000210 supersedes 31110082. 140A Volvo part number 36050270 supersedes 30658084, 30667892. The 180A would replace a 16...

They are 0121 715009 and 6g9n-10300-ma. I suspect those are the numbers for the cover. 0-121-715-009 & 6G9N-10300-MA are Bosch and Ford part numbers for a 180A alternator, Volvo 31110085. Ford owned Volvo from 1999 - 2010. Of course they combine their purchasing power to get a better price. Do ...