Kat stranded me today. Slight surging as I pulled up the hill the one mile to the train station, then dropped to an idle amd stalled just as I pulled into 25A major route. Pushed to side. Cranks m fires , rough idle , then stalls. Feels the poor fuel delivery problem. Hope the pump hasn’t come loos...

You can find the connectors at auto stores usually, or Amazon. You'd just need to cut back the wires a little and splice in the new ones.

I have similar problem on a Mercedes. I found this Dorman product available from O Reilly. It claims to have ceramic connector to avoid heat damage. I have not tried this product.
volvolugnut

The plastic harness into which the headlight bulb plugs fell apart as soon as I removed it from the assembly, so I went to take one from the T5, and the same thing happened. I can snug the connectors back on to a new bulb, but is there a more permanent fix? I had this happen to my xc90. I spliced i...

The plastic harness into which the headlight bulb plugs fell apart as soon as I removed it from the assembly, so I went to take one from the T5, and the same thing happened. I can snug the connectors back on to a new bulb, but is there a more permanent fix? Though the wire covering is now plastic i...

The plastic harness into which the headlight bulb plugs fell apart as soon as I removed it from the assembly, so I went to take one from the T5, and the same thing happened. I can snug the connectors back on to a new bulb, but is there a more permanent fix? Though the wire covering is now plastic i...

+10,000 points awarded for use of ‘moribund’

+10,000 more for correct use of ‘ moribund’

A little disappointed that I've found an Aisin thermostat is a reboxed Mahle. It's made in Germany, but doesn't really look all that impressive to me. Maybe it'll still work great.

That's the "Chain is off" code?

TPMS function would be more important