brunocerous wrote: ↑13 Apr 2021, 19:43 Also, is it me, or is there a hose missing on the right side of the fuel pump cap?

Here is 2000 words worth ...

Well done on the fuel tank fix. Hopefully that is the issue done with.

Neil.

I’ve been commuting from Albany to PortJefferson via Bridgeport on weekends, on Monday I brought by returns to FCP. I pInged Scott D, President of FCP , and he graciously gave me an hour of time to tour FCP Wow! They are growing like gangbusters and we talked over the pains of double digit growth in...

If you are anticipating working on your P80 and watching YouTube videos, here's a word of advice (one might even say a warning): Stick to videos by Robert Spinner (RobertDIY) and stay away from those posted by FCP Euro. The FCP Euro people are great guys, and I buy just about ALL my parts from them ...

Thanks for the support and comments. Although I don't watch a lot of other instructional videos, I can say this about my videos... 1. I try to produce my instructional videos so that a 14 year old person can complete the task. 2. Best effort to do it safe for the DIY person. I don't like getting hur...

I’ve never figured out why those radiator Torx bolts get so rusty. I guess it’s the heat from the radiator. After I’ve spent 15 minutes per bolt fighting each one out with a vice grip, I throw them away and replace with cheap ss screws from Lowe’s, hex head. I documented the size somewhere here... ....

bmdubya1198 wrote: ↑19 May 2021, 09:50 I have yet to see any improvement from URO.

Almost 6 years and Üro is still on the trailing edge. Actions, inactions in this case, speak louder than words.

brunocerous wrote: ↑18 Aug 2021, 05:26 What a great photo. I’m so sorry for your loss. I’ll be sending good vibes your way. -B

Let me know if you need that ETM, B.

Two possibilities - the lines may be clear, but the hose is not tight enough as they appear to shrink with age. The fix is to pull the trim and gain access to the hose and add an inch or two of hose for length, which is really about six inches. If this is your problem you can find off the shelf clea...

Another possible water leak path is from the seal at the blower motor and fire wall/cowl. See my post for a solution I made for this problem.
viewtopic.php?f=9&t=71407&p=473882&hili ... an#p473882

volvolugnut