Login Register

Search found 927 matches

Return

by abscate
19 Feb 2018, 08:55
Jump to forum
Jump to topic

Re: Serious front of engine oil leak '04 XC70

When I did my 1999 CVVT hub last fall

viewtopic.php?f=1&t=83008&p=452202#p452202

jdawg and kahl saved my a$$ by warning me about these bolts. The collective is strong.
by prwood
01 Mar 2018, 14:42
Jump to forum
Jump to topic

Re: Serious front of engine oil leak '04 XC70

I'm not sure why I hadn't seen this before, but it actually looks like Home Depot sells these bolts (and my local store seems to have them in stock for pickup): https://www.homedepot.com/p/Everbilt-M7-1-0-x-80-mm-Zinc-Class-8-8-Metric-Hex-Bolt-839058/205037780 That's basically it, right? No idea abo...
by RickHaleParker
04 Jul 2018, 22:38
Jump to forum
Jump to topic

Re: What kind of sealant for the cam cover?

.
Even thin film. The book say roll it on with a short hair roller. If you pay attention to your work, a finger works just as well. My guess the roller is for people with zero artistic talent. One could still mess it with a roller if they overload the roller.
by SuperHerman
04 Jul 2018, 23:28
Jump to forum
Jump to topic

Re: What kind of sealant for the cam cover?

Anaerobic sealant is used on finely machined surfaces to fill the slightest imperfections. It dries with the absence of air, so any extra that oozes out when torquing gets washed away over time. Thin is best - usually with the red stuff - slightly pink on the aluminum is sufficient. I like a foam ro...
by erikv11
05 Jul 2018, 08:52
Jump to forum
Jump to topic

Re: What kind of sealant for the cam cover?

Roller is far superior to the finger in this case. Like Herman says, only use the finger in a tight area the roller didn't get to. Much easier to keep the layer thin with a roller. I use a short nap paint roller but sounds like foam works well too. Do some googling for images of people using the sea...
by oragex
05 Jul 2018, 09:23
Jump to forum
Jump to topic

Re: What kind of sealant for the cam cover?

Not sure about the cover, but for the head gasket it takes anaerobic sealant. Here's why


by prwood
07 Jul 2018, 15:15
Jump to forum
Jump to topic

Re: What kind of sealant for the cam cover?

Also make sure every mating surface is super duper clean before applying it. Recommend using gloves to handle cam cover so that you don't accidentally get finger oils on the fresh sealant. Another gotcha is that I had accidentally left a small amount of oil sitting in the rings for the spark plug tu...
by abscate
09 Sep 2018, 03:00
Jump to forum
Jump to topic

Re: Car entry remotes

Try unlocking and locking the car five Times using the key in the driver door, then try the remote

P2 key fobs run about $400 plus dealer trip
by oragex
09 Sep 2018, 05:10
Jump to forum
Jump to topic

Re: Non-Volvo car chat megathread

Just chinning in and hopefully not diverting from the ongoing conversation. Not often times is insomnia really rewarding but this night I was chewing through some Youtube videos only to stumble on this interesting episode of Chris Harris about a legendary Le Mans cars, the Porsche 962 from the 90's....