Has anyone created/come up with a bench test for the 4C shocks? What I had in mind is - with springs removed "energizing" or putting a simulated signal on the 'wires' - would need to know more about what the signal/power actually is - and testing for a change in resistance to movement of t...

After reading through SW SP long thread - some comments suggest that the connector (2wire) is a duty cycle acting on the solenoid in the shock - 100% on is "soft" and 0% dutycycle is maximum resistance. SO, given the 2 which I know are bad, I can diss-assemble them from springs etc and see...