Yeah, most paint will do that. Definitely don't rub it at all, try to remove it quickly.
Typically a quick detailer works pretty well to remove the stains left behind. Just try to clean it up quickly to avoid any kind of etching.

Wow, that looks like some serious work man! Nicely done! Can you - or anyone on this forum - help me out with a question about audio in my S70? Here's the thing. The speakers in the car work fine, I think quality of the sound is just perfect. But, I miss some bass in the sound but... I don't see me...

OEM parts for everything if you want to run the car long term. Spark plugs are important too, especially in turbo models. We have had a couple of stutter threads resolved by switching to Volvo plugs

In Engels, "Camshaft sensor" of "cam sensor "

So a while back I used Carpro Hyrd02. I washed, clayed, and polished the coat before using this stuff and the S70 was like new. Water just slided right of the coat. Now, 1 month later, I'm not really all too happy with the product. The shine is gone, because of the salt on the roads and snow, so I ...

Flash code reader. Lots of excellent posts on here already detailing how to make it and read it. All you need is three bits of wire and a 12v led. A switch makes things easier but isn't required. Heres a link on how to read the codes: click Heres another two on how to make it: link 1 and link 2

Most parts fit the same however the 10v wasn’t available in North America, so FCP or IPD won’t list it , try Volvopartsoline.com. There is no breather hose to the top cam cover and the short hose from the breather box to the bock is slightly different (can’t remember why or how ), I ordered that hos...

I have the 2l 10v engine, however did not have to do the pcv yet on this car. https://www.volvopartswebstore.com/showAssembly.aspx?ukey_assembly=234413&ukey_make=865&ukey_model=11974&modelYear=1998&ukey_category=7072&ukey_driveLine=478&ukey_trimLevel=24656 have a look there, ...

There is usually some grease on the PS reservoir from the foaming of the fluid, if it’s damp but not wet, don’t worry about it. Just wiped it off with a paper towel once a month, then use the Paper to check the level, and then your oil Tuck the Paper towel into the top of your shock tower because th...

Ocelot wrote: ↑27 Jun 2019, 05:59 I know the high pressure hose/pipe in the area of the compressor can break due to rust. I don't know how to say it in proper English, my bad!

Engels is uitstekend !!