So yesterday night, was about getting home, car suddenly lost power, everything went off, tried restarting, nothing works, found out the key wont move down to start and wont move to zero, tried to do the shift lock, still nothing, tried removing the battery terminals, still nothing, steering locked,...

RickHaleParker wrote: ↑11 Mar 2019, 12:32 With the remote: Lock\Unlock five times then try to start.

Thanks RickHaleParker, did all that nothing worked, the technician traced the wires from under the fuse panel in the engine bay and found a bridged wire suppling current to the fuses and corrected it and it worked fine.

Finally got the p0011 solved, after changing the CRV, change oil, changed the timing belt, reset timing countless time was still having p0011 and engine s runs rough, was about giving up until I met a mechanic who fixed it, all did was to retard the bank 1 timing by one mark and the car runs like a ...

Check the battery, Low voltage can cause these symptoms. Check the fuses and connections on the CEM (Under the dash, passenger's side). All fuse at CEM ok, no blown one, reconnected all sockets , even checked all the fuses in the engine compartment. It only makes a huming sound and writes brake fai...

Hi, I'm back again, I was away for about amonth, left the car parked all this while, I remember I had 3 codes for 02 sensors p0031, p0037 and p0147 all about 02 sensors....during my trip away did a whole lot of research online and found out a bad o2 sensor can make the car run rough. Came back yeste...

Always list the full code number and don't shorten them up! P0011 not 0011. The P tells us something. There is a B0011, C0011 and a U0011 also. The codes communicate a lot more than symptoms do. There is more then one O2 code. Hold off on replacing the O2 sensor. Replacing an O2 sensor is an option...

I need to clarify something, what's the difference between the cam reset valves and the vvt solenoids? Welcome to the English language which often has two or more words, or names, for the same thing. Cam Reset Valve is what Volvo calls the part, VVT solenoid is a common name for a Cam Reset Valve. ...

I need to clarify something, what's the difference between the cam reset valves and the vvt solenoids? Welcome to the English language which often has two or more words, or names, for the same thing. Cam Reset Valve is what Volvo calls the part, VVT solenoid is a common name for a Cam Reset Valve. ...

I need to clarify something, what's the difference between the cam reset valves and the vvt solenoids? Cant seems to locate the cam reset valve on my t5 2.4i non turbo s40 2008 engine, all I see is one sticking out big soleniod just before the first ignition coil from the passenger side. Is that the...

Thanks for the info, will try and clean the reset valves and get back to you, if it works fine, if it doesn't will get it replaced.
Also found out the throttle body is bad, changed it and the performance increased to about 80% but the code p0011 still comes on. Will keep u posted.