Welcome to the world's #1 Volvo forum!

Volvo Fixes & Advice since 2001.

Login Register

Search found 80 matches

by DeadEric
Mon May 04, 2020 5:08 pm
Forum: 850 and S70, V70, C70, V70-XC 1992-2000
Topic: 98 V70XC MAP/Baro sensor issue. Topic is solved
Replies: 7
Views: 317

Re: 98 V70XC MAP/Baro sensor issue. Topic is solved

Thanks for the help, this info is perfect.
by DeadEric
Sun May 03, 2020 3:26 pm
Forum: 850 and S70, V70, C70, V70-XC 1992-2000
Topic: 98 V70XC MAP/Baro sensor issue. Topic is solved
Replies: 7
Views: 317

98 V70XC MAP/Baro sensor issue. Topic is solved

I'm getting P0108 codes. I checked the sensor and its poo. In my research I have found the it sits by the hood latch next to the washer fluid jug. It doesn't measure manifold pressure, just altitude. The sensor is $180 from worldpac, $60 from ipd and I can get a resistor for 5 cents. My thought was,...
by DeadEric
Sun Oct 13, 2019 6:16 am
Forum: 850 and S70, V70, C70, V70-XC 1992-2000
Topic: No heat, quick question.
Replies: 2
Views: 181

Re: No heat, quick question.

Most helpful.

Thank you.
by DeadEric
Sat Oct 12, 2019 7:16 pm
Forum: 850 and S70, V70, C70, V70-XC 1992-2000
Topic: No heat, quick question.
Replies: 2
Views: 181

No heat, quick question.

I've watched Robert videos, done searches on the forums and looked at service data and wiring diagrams but still have a couple of questions. I planned on working on this before winter but it snowed today and I need to get it figured out this weekend. 96 850 platinum edition with ECC. Blows warm (alm...
by DeadEric
Tue Jun 04, 2019 1:00 am
Forum: V70, S60, V70-XC and XC-70 Cross Country 2001-2007
Topic: Water Pump Leaking
Replies: 8
Views: 618

Re: Water Pump Leaking

If I use rtv, it's only on the pump side of the gasket to keep it in place during install. Keeps you from having to clean it from the block next time. You can add coolant after the pump is installed before the belt is on. It should leak, if you have one, as the air will have a place to escape. I usu...
by DeadEric
Mon Jun 03, 2019 11:32 pm
Forum: 850 and S70, V70, C70, V70-XC 1992-2000
Topic: Another heater hose thread... (2017) URO Heater Hoses made in Thailand?
Replies: 23
Views: 3154

Re: Another heater hose thread... (2017) URO Heater Hoses made in Thailand?

I bought a URO elbow the other day, mine was torn. It connects a pcv hose assembly to the air box snorkel. Volvo part is $10 unless you get the assembly then it's $50 plus the dipstick o ring and the intake gasket and probably injector o rings depending on how they look. In my case, if I'm taking of...
by DeadEric
Mon Jun 03, 2019 10:43 pm
Forum: 850 and S70, V70, C70, V70-XC 1992-2000
Topic: 96 850 Testing for battery drain
Replies: 15
Views: 768

Re: 96 850 Testing for battery drain

I'd pull the glovebox bulb until you find a fix for it staying on. It's a known issue so take it out of the equation. The only thing I can think of for a fuse to have a voltage drop of near battery voltage is if the fuse is blown. Power on one side, ground on the other and nothing connecting them......
by DeadEric
Sun Jun 02, 2019 9:26 pm
Forum: 850 and S70, V70, C70, V70-XC 1992-2000
Topic: 96 850 Testing for battery drain
Replies: 15
Views: 768

Re: 96 850 Testing for battery drain

Sounds like you have a parasitic draw. JimBee is correct, anything after the decimal is mA. If it's been a constant issue your battery could be weak beyond repair. As long as it holds some charge you should try to find the draw before you replace it. The key to ruling out parasitic draw is finding t...
by DeadEric
Thu May 30, 2019 8:57 am
Forum: V70, S60, V70-XC and XC-70 Cross Country 2001-2007
Topic: [2001 V70 2.4T] Ignition coil cylinder 3 and cylinder 5, signal too low (P1354,P1358/ECM-3320,ECM-3340)
Replies: 18
Views: 2899

Re: [2001 V70 2.4T] Ignition coil cylinder 3 and cylinder 5, signal too low (P1354,P1358/ECM-3320,ECM-3340)

Not that I'm doubting what you're posting but generic P1354 in Google comes up as a vvt issue and p1358 in Google comes up as cylinder 2. Again, I don't doubt what you're posting I was just trying to find code setting criteria. I've found that knowing under what conditions the codes set, helps in ru...
by DeadEric
Thu May 30, 2019 5:23 am
Forum: V70, S60, V70-XC and XC-70 Cross Country 2001-2007
Topic: [2001 V70 2.4T] Ignition coil cylinder 3 and cylinder 5, signal too low (P1354,P1358/ECM-3320,ECM-3340)
Replies: 18
Views: 2899

Re: [2001 V70 2.4T] Ignition coil cylinder 3 and cylinder 5, signal too low (P1354,P1358/ECM-3320,ECM-3340)

Check inside the boot of the coil. I've had the metal piece on the end of the spring fall off unnoticed. With that missing, the spark has to jump twice and will give those codes.

Boot and spring sets are cheap, I recommend them when doing plugs.