Trying again to attach figures

Figures

I replaced the right hand side hydromount. What a difference this makes!! The engine mount was so badly damaged that the engine side bracket and the body side mount metals were touching all the time. The rubber element was unable to support the engine mass. The result of this failure made it continu...

Thx

No the mount I am referring to is almost directly below the large end of the torque strut. It is a non-hydraulic torque reaction mount. I wonder if I have to remove this attachment in order to lift the engine up high enough since it is located between the cradle and the engine and could stop the eng...

Thx Paul Link was informative. My only other question is; In order to lift the powertrain up high enough to install the new taller mount (un-collapsed mount ) was it necessary to pull the thru-bolt out of the lower torque reaction mount (small mount located below the upper torque strut that is attac...

Hi I am looking to change the engine mounts on my 2007 S80 3.2. The rubber in the upper torque strut elastomer was completely separated and changing that out was a relatively simple task. Did not improve the ungodly rattle at idle and under load. I’m pretty sure all mounts need to be changed but I t...