Can I not use the con which I have linked? you can still order these boards, and desolder the chip and resistors and solder them on the pcb you found. if thats waht you were thinking about ? That makes sense for the chip, but where would the resistor go on the pcb? Actually funny does not look like...

you can still order these boards, and desolder the chip and resistors and solder them on the pcb you found. if thats waht you were thinking about ? No I am using a chinese MCP2515 board and just soldered the jumpers together to avoid using cables to short the jumpers as I was experimenting on the b...

So, with these, I don’t need the resistors If you look at the board in this link : https://www.waveshare.com/sn65hvd230-can-board.htm You can see there is a small 10 k resistor on the board next to the chip on the side of the board, at the top were the screws are there is a jumper which connect the...

So, with these, I don’t need the resistors If you look at the board in this link : https://www.waveshare.com/sn65hvd230-can-board.htm You can see there is a small 10 k resistor on the board next to the chip on the side of the board, at the top were the screws are there is a jumper which connect the...

Good evening. I have been for a cheap but effective way to unlock my cem pin through the obd2 port I found the teensy 4.0 method but I'm having a hard time finding parts. I found a pcb file which has all the wiring for the pcb as well. However, I cannot find the bosch cf160 transceivers needed for ...

Good evening. I have been for a cheap but effective way to unlock my cem pin through the obd2 port I found the teensy 4.0 method but I'm having a hard time finding parts. I found a pcb file which has all the wiring for the pcb as well. However, I cannot find the bosch cf160 transceivers needed for ...

Good evening. I have been for a cheap but effective way to unlock my cem pin through the obd2 port I found the teensy 4.0 method but I'm having a hard time finding parts. I found a pcb file which has all the wiring for the pcb as well. However, I cannot find the bosch cf160 transceivers needed for ...

I need some help getting my IMMO code and i got some information that you can retreive the code if you have the CEM flash and the eeprom? So i hope someone is able to help or explain me how this can be done with the unit still in the car. I did see some stuff in the past on youtube, off people readi...

Yea that's what i did, and i got my pin as shown on the gist at the bottom of both crack attempts Oh, you've had a success :) Should not type anything before drinking the first morning coffee. Morning Coffee :shock: i just had my diner 8) Uhm i did some light reading and searching, is T5luke still ...

Some info to share, I was trying to get the pin from my volvo v50 p1 from 2004, i used 2 versions of the cem cracker because i could not get a good result the first time. The next link will give you guys the outcome of the 2 attempt i made. https://gist.github.com/rednasdees/6288cb955c86bc11fa9af44...