That message usually points toward the PNP switch or the mode selector switch on the transmission. On older Volvos those switches can get dirty or misaligned and send a “signal too low” fault to the transmission control module. I'd advise you check the connector and wiring near the gearbox because c...

A throttle body cleaning is a good place to start, but also check the idle air control valve and vacuum leaks. To my knowledge, either can cause RPM to hang between shifts. As for the turbo, a 16T will bolt up easily, but you’ll want upgraded injectors or fuel pressure adjustments to run it safely. ...

You can release the shifter by removing the center console trim and manually disconnecting the shift interlock cable like you mentioned. It’s a fairly simple setup on the 940 compared to newer Volvos. Once the cable is free, you should be able to move the selector into neutral and load it onto the d...

Those wheels are pretty sought after now, especially in good shape. You should keep an eye on local listings, sets pop up every now and then. Hopefully someone here has a spare set or a few they’d be willing to part with. Good luck with the search.

Great idea for a thread! Always fun to see what others are working on. I just finished a brake pad swap and planning to tackle a coolant flush this weekend. Looking forward to seeing what projects everyone else is up to! If you’re organizing local meetups or sharing location-based tips, this postcod...