I found that the best way to bypass the green wire win an AVIC-7000NEX was here:
http://avic411.com/index.php?/topic/385 ... nly/page-4

Still loking for a way to hook up the pink wire.

Hello,

I Just bough a Pioneer AVIC-7000NEX, a huge beast :) I soldered most of the wires for the harness but there is still some wires...

First, there is the purple/white one witch should connect to the reverse gear signal wire ( where is this one !?!?!) for the rear view camera.

Second the pink ...

You were right, the vacuum line (-1998 LG 520 mm by the meter (976735) between the top part of the turbo and the TCV) was cracked...
I wonder where I`ll find that a sunday morning...

Thanks!

I left the sensor connected. I've removed the diode and found it, gasp, shorted therefore directly shorting pins A32 and A37. This is what caused the 132 and 138 codes. Now I'm back to the original 410 code but luckily I didn't damage anything. This week I'll be reattempting with a new diode and I ...

There was no clip to open my box simply a sticky silicone gel or something alike... I beleive there must be a way of removing it in a better way. I tought of screwing my box on a wood piece then making myself a 4 ways pivot to push on all the sides of the box at once... But unless I would like to ...

I just tried it on a 850 1996...

I broke all the edges top of the box trying to open it...

Using a flat screw driver to open it I managed to damage a transistor...

BUT ! I removed a transistor of the same size and color from an old computer hard disk drive and soldered it at it's place *I was ...