Guys - Didn't intend to cause such a fuss! I know that I'm in the 850....v70 forum but this is where I originally found the source for the Mobil 3309. The company in Columbus is AV Lubricants, $63/case.

Cheers!

JRL - Thanks for the reply. I've got left over quarts of 3309 and was going to use it in my '03 S80 that seems to be shifting hard.

Guys - I bought a case of Mobile 3309 from a place listed someplace in this forum but can not seem to find the link again to buy more. Appreciate it if someone can lead me back to the link or simply tell me the name of the company in Columbus, OH that sells the 3309. As always, THANKS!

Mystery noise (rattle) seems to be coming from the rack (cylinder shaped component with lines running it). Rattles only with brake applied, while in reverse only and with wheel turning to left. Have it up jack stands and can feel it in control arms and other passenger side suspension components. Hap...

Let me know what he wants for the drivers side interior door panel and the center console cover, assuming these are light beige rather than taupe. Drivers side seat worn? Pics

I've got an '03 S80 that occasionally would make a loud clank when going from reverse to forward backing out of the driveway like something was releasing. Thought that I might need rear pads so pulled a rear wheel but the pads looked great. In turning the rotor without the caliper and pads on, I not...

Let me know if anyone has a factory speaker for the ft door in a 2003 S80.

Getting ready to put a new passanger side transmission seal in to hopefully stop a small leak. Anything I should know about removing the old seal? Axle is out and I was simple going to try to coax it out with a screw driver. Thanks!

So here is the deal on my s70. The only wires coming out of the pump are the ones that go to the connector. The connector is located just behind the driver side headlight. I don't have the configuration shown where the relay and ground coming out of the pump are located right next to the pump. So wh...

Anyone know what size the torx bolt heads are on the back side to get wheel hubs off?