I have spark and The gears line up

Okay the timing belt is tight and the teeth look a little worn but everything is on the sprokets. I put a computer on and the trans range circuit code came up. I tried starting fluid in the air flow but no good

okay so i took apart the case to see if the belt was in place...the belt is intact, it looks worn but none of the teeth look off...so my next step would be to replace the belt? and if so, where do i find the engine number? i called autozone for a belt and they have one in stock but i cant find the e...

Thank you for the help. One more question. If I had blown the engine and screwed up the valves would I hear knocking from my engine or wouldnt my car freeze and not crank over? What are the signs for blown valves

the belt is intact but the guy who looked at it said it jumped a gear or something because the belt is till in good shape. I was at a stop light and when i went to step on the gas the car stalled out. when i go start the car it cranks over, the belt turn but the car acts like its getting no gas; the...

Is the engine in my 1995 volvo 850 Non-Turbo station wagon a inteference or non-inteference engine..I need to know cause my timing belt blew on my car after 25,000 miles and I hear no engine noices when i go crank the car

It is the trans range sensor..it controls my odometer and rpms..but i dont know which sensor, number 5 or number 7 fixes that

i am in dire need of help! my check engine light came on, need to replace the transmission speed sensor in my '95 model 850 stationwagon. i have the haynes repair manual but still cant seem to locate where the speed sensor is, even with the small picture it has with the diagram. anyone have any idea...