I don't know if this is going on everywhere but I just paid $23.50 for a 5 gallon jug of Mobil 1- High mileage at Walmart. I don't know how long the sale is but I am going to go back for more. The regular 1 quart size is $6.27 regular price. Stock up now. Thanks again for all of you alls help with m...

Well, I found four of the little tiny "spacers" they are called. But I need five. So I checked at NAPA and they did not stock them. FCP groton has them for $ 1.49. I called my local dealer and they are $ 5.00 each!!! Oh well, I guess I bite the bullet and get them at the dealer today, alon...

Well, I changed over the o rings and was about to put it all back together. I was checking everything over one last time. Just for grins I felt up the rail in each whole. All I felt was metal in 4 out of 5. In one hole there was a little split o ring all the way up. I checked again and there were no...

But how do you get the new one on ??? Its diameter is so much less than the stop on the bottom of the injector. It is only plastic and I don't think that it will give that much. I don't want to break the old one to get it off and not be able to get the new one on. Thanks JD for the quick response. Don

Hi You all. I have searched the archives and could not find anything on how to rebuild a fuel injector. The rebuild kit came with a little yellow pastic seal which looks like the one on the injector after the o ring on the bottom. I have tried to twist off the bottom but it doesn't budge Is there a ...

Again, thanks everyone for all of your help, advise, and prayers.

I really have learned alot along the way. But I wouldn't have been so bold without you all's help and support.

Here's hoping and praying for many good years to come.

I will see you all on the forums.

Thanks again,

Don

Yea there is a GOD!!! I went to the junkyard and picked up a CPS and a new fuel relay. I out the CPS in and it had spark and did not send code 314. I stopped and put the straws wirth of oil in each cylinder. It strated but wuould not stay running. I put the air filter box with the mass ais flow sens...

OK. I went out and checked the wires as jablackburn suggested. _______________________________________________________ In particular, you'll want to check the grounds at A20 and A29, the control signal to the main relay,and the POWER STAGE (ignition coil) control signal from B13. That's the one I su...

Thanks to jpgurley I am now the proud owner of three ECUs with the same part numbers and version numbers. I put in the ICU and checked it and it came up 111. I prayed and gave it a whirl and it did NOT start. I checked A6 and I got error 314 again. I cleared the code and put in the EFI/Engine ECU an...

The CPS sensor ohms out ok, it is just that it is not getting a grounding signal from somewhere- more than likely the ICU. I checked and pin 1 has 12 volts and pin 2 has 5 volts and pin 3 is 0 volts-ground. When I crank over the engine I was told that pin 2 should drop to 2.5 volts but it stays at 5...