I just noticed the top screws on cluster have broken off,so cluster sits back a little,are there any ideas to pull it back up so there isn't a gap. right now I have two pieces of rolled up 3/4 heater hose in gap to keep it from rattling too much..

I fixed the door acuator,i see the pull lock go up n down,the door now locks but I can't open from outside only from the inside but it stays locked even if I open and close door from inside of car,could it be the outside hadle or some clip u all mentioned could have broke..

i screwed on each bumper stop a screw with big head and now works everytime..

I do hear the motor when I press the buttons

Im sorry, the door opens fine it just wont lock when i depress the lock button

MY light will come on and go off on occasions, when it comes on i can feel brake pedal buzz,but thats it,drives normal, i changed front n reat abs sensors any other ideas,my trac light has never come on going on 2 yrs with this.

I see door stud going up and dont put door wont lock

i have to pull up on on end of my hood while pilling handle,do I have to replace hood releases

Thanks for the ideas,I used the 3pennies taped to 1/2 breaker bar,worked like a dream,The plastic idler pulley my spins freely,does not feel tight is it ok.If I have to change it i see that there is a cap how difficult is it to change cause theres no room for a socket

I was thinking of changing belt before I sell the car,but didn't want to shell out another $30 for tool,does anyone know of any other ways to make a small tool that will fit in tensioner,i"ve heard of a roll of quarters working..