how do i cut these wires and where do you find them,and could u put a switch on these wires to turn off tyre shredding mode and switch it back for wife and kid mode....

thanks

blow the hoses out to as you check them as ive found over years of window washer fluid can set like concrete.but be care full no to blow the lines off in hiden areas.

hay guys i had the same problem to but as i found by pullin my car apart found that the control lever above heater fan came off, dont no what is exacty but if you remove your clove box and slighty to your left you can see a square shaft and a control lever,on my it had come off but its quite hard to...

awsome write up good photos to ,thanks for ur time for doin this ,i did mine to but i used led flat bord type from my local repco dealer and it looks awsome,

how do that was a fast reply..all my vac lines are nearly new and are of the silicone type. boosting changed as soon as i reset the timing. and have checked all vac lines etc.

thanks guys what i did was slightly loosen the three bolts on the exhaust cam as the bolts in the slots where 3/4 of the way to the left in the cam slots and moved the cam so the bolt ended up being 1/3 into the right side of the cam slot,and centred the cam bolts on the cam slot on the in let cam. ...

Need help 850 turbo lads and ladies.ive just advanced my exhaust cam 3-4 deg and put my inlet cam in the centred position on the cam wheel may bee 0 deg as per pics and information as found on this forum. Now heres the questions ,car has way more power in mid range and top end (awsome).but now my 85...

who makes the best ecu chips and bang for buck. thanks

yes your rite,i tride a flee bay chip worked well for about 4 mounths and the ecu chip lost its memory and the chip couldnt remember boost control and over boosted inevery gear etc,only prob is the cost of a real tuner chip is the bloody freighting.would love 2 have a ipd tune....