Update I went out today and jack the car up and put it up on a jack stand. Well I looked underneath and saw that the bottom of the strut housing was bent. The shock was hitting it. And a piece of the bottom strut housing is broken off some. So I have to get a new strut housing and bearing. Is there ...

Please is there any one on here that can help me with this issue?

Hello all, I have a 2000 S40 that is making clonking and clanking noises when I go over bumps or even reflectors in the road. I changed all the engine mounts this weekend passed. And about 10 months ago I changed out the strut housing bearings and I still got the noise 2 days later. Now would I need...

I took the car to the volvo dealership to get my codes read for free. Well the tech told me I needed to get my cam seals replaced, my CVVT HUB needed to be cleaned, My coolant Temp sensor also needed replaced. And he said the codes for my tranny he never seen before since the 8yrs he has worked on v...

The original problem was the Idle Stabalizer code P507 came up so I had it replaced. After the idle stabalizer got replaced then a code for the crank position sensor came up. Now after I got the old code for the crank position sensor erased is when I got the transmission codes what I have sent you. ...

Ok had all codes erased and CEL was off for about 5 minutes then came right back on and the shifter light started blinking again as well. Had the codes read again and I got codes P1618, P0014, P0732, P0733, and P0734. What is it I have to do to get rid of the problem. I have emission coming up soon ...

Ok I had the fault code erased. Now I have codes P0732,P0733, and P0734 from the transmission. Does anyone knows what these codes are and what I need to do to fix it?

Thanks in adavnce.

Hey Bill,

No the fault codes wasn't erased. He claimed it will clear itself after crank position sensor was changed and I drive it.

Hey I'm new here, I have a 2000 S40 with the check engine light on. I had a tech scan the codes and it read I needed a crank position sensor. So it got changed yesterday and the CEL is still on. Now the shift light is blinking and the button isn't pushed in neither. But when I put it in drive and pr...