who've you been going to in town? I use topping in Oly and Boyle's in Lakewood.

Im at a loss for words, ive spent 4,700 on the car so far... all i wanted was a decent car for my family with low payments... ive spent 500+ a month every month..

No one in the community has ever heard a whooshing sound suddenly start out of nowhere?? It sounds like rushing air when I'm steady on the gas and then it sound like spooling turbos when I get off the gas, but I've never ever heard it before... Coming from drivers side.

Anyone?

Just had the timing done by Volvo, went ahead and replaced tensioner (Volvo), idler (GMB), belt (hecho en mexico), & Water Pump (Volvo) as well as the Aux belt. Originally the tensioner was also GMB but it seized up a week after and my timing jumped a tooth and it started running really crappy. ...

I bought this kit from FCP Groton.. http://www.fcpgroton.com/product-exec/product_id/65762/nm/Volvo_S80_T6_Timing_Belt_Kit_2000_2002_ The parts were part Asian and the Belt was Mexican made. I hadn't heard anything bad about them. I also had to buy a new water pump from Volvo and a new serpentine be...

Here is a drawing I did of the basics. I can't get a clear picture. The "shield" behind the nipple (broken part) is actually just a dust shield it leads back to a smallllllllll .07 or so hole that then runs into the sensor whose wiring runs up from there. It's still fine. This component is...

can I just plug this damn thing? I think its part of a bleeder system.. i think its bleeder hose part..

that nipple has an elbow right? Here's two pictures of what I'm looking at. I was just tightening a piece down and heard a sizzling sound and saw the coolant leaking. Coolant literally flushed completely out from the small hole in the second picture. Oh and that piece is stuck in there of course.. D...

2002 S80 T6. Was replacing motor mounts.

The coolant line that runs out of the timing cover snapped off!!! I barely touched it but it snapped off at the elbow where it runs into the top of the pump...

What should I do?? I don't even know how to get to it.

Any ideas?

Also, any idea what it would cost to get that piece replaced by a mechanic? The whole breather box doesn't need to be replaced. Just that piece. THey could probably even splice it. I'm just tired of tearing it apart every weekend to fix something new..

Ok. No codes. CV joints and mounts are causing the shakes. The hissing... well Fml guys because its the pcv system. From the banjo bolt on the UIM back there is an elbow (not the nipple but closer to the breather box) it has a plastic piece coming out. It's snapped off somehow and Idk what to do.. c...