Hi jwest01,
I am interested in buying whole car to repair. Still for sale.
Search found 4 matches
- 10 Jul 2026, 09:37
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: 1998 volvo v70 with 5 speed manual transmission and 3row
- Replies: 5
- Views: 284
- 18 Jul 2011, 13:46
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: Ants in the Starter Relay
- Replies: 5
- Views: 1963
Re: Ants in the Starter Relay
I had a similar situation with the AC relays on a full sized Ford Van. Took the boys to scout camp and stayed the week with them. Got in the car to drive home and the AC blower fan would not come on, but I could here the compressor cycle and feel cold air come out the vents when I put the AC in ...
- 18 Mar 2011, 14:43
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: Timing Belt Tensioner Pulley Bolt Stripped
- Replies: 7
- Views: 5114
Re: Timing Belt Tensioner Pulley Bolt Stripped
Hi cn90,
In my case the recess was perfectly clean and shinny, the recess is too shallow (only 1/8 inch deep)even for the prescribed 15lb of torque on the bolt. Anticipating a problem, I wedged a scrap piece of wood between the frame and the back side of my ratchet handle forcing the T45 bit into ...
In my case the recess was perfectly clean and shinny, the recess is too shallow (only 1/8 inch deep)even for the prescribed 15lb of torque on the bolt. Anticipating a problem, I wedged a scrap piece of wood between the frame and the back side of my ratchet handle forcing the T45 bit into ...
- 18 Mar 2011, 07:31
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: Timing Belt Tensioner Pulley Bolt Stripped
- Replies: 7
- Views: 5114
Re: Timing Belt Tensioner Pulley Bolt Stripped
Hi Swan,
I just went through this. Dam poor design. Hole should have been deeper in bolt head for better grip. Anyway, here is what I did to get it off. You will need a good quality hacksaw blade (i used and 18Tx12"), a pair of vice-grips, and about an hour of time. Place the hacksaw blade in the ...
I just went through this. Dam poor design. Hole should have been deeper in bolt head for better grip. Anyway, here is what I did to get it off. You will need a good quality hacksaw blade (i used and 18Tx12"), a pair of vice-grips, and about an hour of time. Place the hacksaw blade in the ...