1996 volvo 850 ( base) Removed my engine to fix a rear main seal. Have it all back together Problem: gears are not engaging it seems that they slip or engange at some point. When I started the car I did not hear any loud or bad noises. When i installed the torque converter I made sure it was sitting...

Could you tell me more about the 3 seals (input x1 output x2) I am replacing the 2 axle seals, torque torque seal and rear main seal, would you consider opening up the transmission and checking any gaskets if there are any?

pictures from my previous post

1996 volvo 850 non turbo station wagon. As you can see in the pictures I took my engine and transmission apart, had a BAD leak . Question 1 (picture 3): to take Rear main seal, if you look closely in the green circle pointed by the red arrow there is a little metal O-ring with a tab, is that the way...

Yeah, I is attached under the radiator tray and connected to a hose that goes somewhere into the cabin, vacumm to it moved the throthle as if I was accelerating.

picture

picture

Is this the purge valve for a 1996 volvo 850 ( base) was diging around after p0410,p0442 and p0446. What i found: 1) small vacumm leak created by battery I assume since it was asmall hose right underneath the battery 2) J shape hose mentioned in other posts: J hose was OK, charcoal canister nipple w...

Thank you Lee. Intresting enough mechanic said he pulled codes p0410, p0442, p0446. P0410 was the only code my reader picked, replaced check valves (both) check airp pump: works just fine. Changed PVC and found a completly clogged with solid oil vacumm hose that cracked when I removed it (vacumm hos...

There are no codes, the only time the check engine light turned on was a P0410, other than that none, very frustrating