So I'm about to tackle replacing the electrical part of the ignition switch assembly in my 90 740 turbo. The ignition is located on the dash.

What are the steps to replacing it? I pulled the dash cover off around it and couldnt figure out how it comes apart.

So, my turbo is definitely in need of a rebuild as it is letting oil pass through and burn and smoke. It is the mitsubishi turbo (not sure the model # but it's from a '90 744). What would be the best for quality and most economical way to rebuild this? I want to do it myself, but if it involves mach...

So if I've just replaced the starter and the vehicle does not start every time. when the key is turned to start nothing happens. Then I will repeat and repeat and repeat and finally the starter will get going and it starts right up. So if it is the signal going to the starter... Is this the part I n...

So I am in the process of fixing my fuel gauge. I've already replaced the gauge so my next step is to test each system and see if it's good. So does anyone know what kind of readings the in tank float assembly should be putting out through the wires? I am going to hook a multimeter up to it but don'...

bump

My check engine light does not come on though. Could I still have a code but no light? The light does work, it comes on for the gauge light test when i start the car

So can anyone provide me with a vaccum line diagram for my 1990 744ti? Or even more helpful, what connects to the small nipple on this part? https://www.fcpgroton.com/product-exec/product_id/14884/nm/1985_1992_Volvo_740_Turbo_PCV_Breather_Nipple/category_id/10 Currently mine is capped off with a rub...

that answers my question. The hunt continues. is the m47 in any way more superior to the m46? I know the m46 is push button O/D and the m47 is a O/D gear. Any comments on strength?

So there is a 760 diesel at the junkyard with a manual transmission. I was thinking about pulling it. Does anyone know what kind of transmission that would be m26 or m27? and would it fit in my 1990 b230ft sedan?

Thanks

the ones that go across the bottom the the white clips attach to and the ones the speaker grills attach to.