Search found 4 matches
- 23 Jul 2016, 07:57
- Forum: S60, V70, V70-XC 2001-07
- Topic: ABS wheel sensor?
- Replies: 11
- Views: 11087
Re: ABS wheel sensor?
I had the same codes on a 99 v70 xc. Had ECM-510F and ABS-0011 codes. Seems like I buggered up the CV shaft when removing. The notches that run around the CV shaft that are right below the ABS sensor were smashed, distorted in several places. I replaced that CV shaft with a spare, cleared the ABS ...
- 06 Apr 2014, 12:08
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: 99 V70 XC rear washer pump location
- Replies: 11
- Views: 7183
Re: 99 V70 XC rear washer pump location
I'm replacing mine now and just got it out . The rear pump motor is located on top of the fluid reservoir (the front pump is located underneath). The rear pump has a gray wire terminal connector with a green and black wire. It's just to the front of the washer fluid fill pipe (which can be removed ...
- 10 Sep 2012, 18:33
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: 99 S70 T5 - EVAP or O2 sensor?
- Replies: 9
- Views: 1651
Re: 99 S70 T5 - EVAP or O2 sensor?
So my problem was:
Blown 20A fuse in the main panel. The fuse is for "Emission System". This must have blown when I caught one of the coil wires under the bolt when tightening it. I replaced the fuse, started the car and the codes were still there. I cleared the codes, restarted the car and the ...
Blown 20A fuse in the main panel. The fuse is for "Emission System". This must have blown when I caught one of the coil wires under the bolt when tightening it. I replaced the fuse, started the car and the codes were still there. I cleared the codes, restarted the car and the ...
- 09 Sep 2012, 06:46
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: 99 S70 T5 - EVAP or O2 sensor?
- Replies: 9
- Views: 1651
Re: 99 S70 T5 - EVAP or O2 sensor?
I just got the same problem with my 99 XC70 B5254T with 135K miles. I had 2 misfire codes (P0352 and P0301). I replaced all 5 spark plugs with Volvo plugs and one new coil. While I had all of the plugs out, I ran a compression test. In the cylinders that had low compression I added a tablespoon of ...






