I replaced the Brake Rotors on my S70 and noticed left side rotor vent holes on my new Zimmerman 302 mm fronts and matching rear Brake Rotors are not in the direction of rotation, as the ones on the right seem to go in the direction of rotation. I think that pattern of holes for ventilation on a Bra...

Gentlemen- I am having intermittent #5 misfire and I have done EVERYTHING,(cap,rotor,plugs new plug wires, compression test) and have finally come to low fuel pressure, IPD says 43 lbs per in. at the Schrader Valve, yet Chilton says for a 1998 2.3 T5 is 58 lbs per in. What I really, really want to k...

Gentlemen-
The CHILTON Manual says that T5 HPT Fuel Pressure is 58 lbs. per inch. Mine has trouble reaching that but is constant at 50. Good Luck

I have lowered my s70 by buying the IPD lowering/sport springs and they lowered the car by 1.75 inches and they are much easier to get along with than the stock "turbo springs" and I have to say that I flat love the look and the ride, the car handles like it should and it looks flat cool.

Gentlemen- I need to know how many Inches of Vacuum a s70, 2.3 litre turbo motor is supposed to have. One of the guys at IPD told me 20-22 Inches in neutral idling warm. I have heard anything from 18 to 25 Inches and I would like to know once and for all as mine is 18 inches steady and I would like ...

Gentlemen- Found and cured the problem, it was a leaky intake manifold gasket, one that I replaced even. Installed new manifold gasket and all is well. To answer my own question there is only one line as Jackburn said and it is the smaller one to the PVC System, all others are vacuum tree oriented. ...

Problem is a vacuum leak, just had to replace my intake manifold gasket due to questionable installation done when the PVC system was replaced. When it first began to fail there was an "escaping air" sound on acceleration, soon engine began running rough with a very feral miss at idle. As ...

Gentlemen- I found my problem-(I hope) there is a vacuum leak on the left side of the engine, I thought it was the PVC hose, little one where it hooks to the intake with the rubber elbow. I checked it and it was fine, yet there was still a vacuum leak, I need to know if there are any other hoses the...

Gentlemen- This is s70fanman again and I STILL have a miss at idle and now a CEL came on and it shows a #1 cylinder misfire and the Idle is still shaky at best. I have checked for vacuum leaks and my Vacuum Gauge shows about 18-20 inches. I have replaced cap, rotor and spark plug wires to no avail. ...

Gentlemen- This one has me at a loss, as my S70 has a definite miss at an idle and I cannot for the life of me find it. I have replaced my plugs, rotor, and bought a set of IPD blue wires, yet cannot get the raggy, feral miss at an idle stopped, I have even gone so far as cleaning my Idle Valve with...