Thanks precopster (M) I needed this, I will also try the heater core you recommended !!
Thanks Kecy( Kevin)

You should give you car's VIN & Engine number to the people you are buying the part from !! I'm about to order a front o2 sensor and do NOT want to order one that won't work. This is the sensor I found through the Amazon link on the site. Can someone verify that this is the correct front sensor ...

Hi, In my 1994 Volvo 850 10 valve, the two plastic tubes from under the throttle are not connected to the EVAP carbon canister, not sure which tube goes where on the two connections on top of the canister?

Unit A / sockets A5,A6, A7, nothing ? I press the red button and there is nothing, no wires either ??? I have got all the codes now for my 95 Model 850 SE Sedan - A1 - 313 A2 - 113 A3 - 211 213 214 141 142 A5 Nothing A6 Nothing A7 Nothing B1 Nothing B2 Nothing B3 Nothing B5 Nothing B6 Nothing B7 Not...

Hey, I use 98 octane in my 850 just about all the time , I get more mileage per/L on the 98 than I would get from 95, worth the few extra cts..

Has to be the O ring ..

Hey, Thanks for the reply, yeah they are soft, I know, I had to remove bolts from Thermostat Housing, lol

You used a drill bit by hand !! you held a 5/8 drill bit in your hand , and turned it??

rspi wrote:They are pretty soft so I removed my with a drill bit by hand.

You could have a vacuum leak somewhere, check before you go spending $$$ ..

Hi,
Like to know if anyone would know how to remove rounded bolt head (T40) on cam position sensor, the top engine mount bracket is in the way ?

Oil On top of the engine is from oil filler cap, and also poring down the dipstick is a blocked breather, you need to clean the flame trap with carby cleaner, there is a small plastic plug with small holes in it which needs cleaning, flame trap is just under the carby black tubing about 3-4" di...