IPD sale Volvo Parts

Search found 181 matches

by ThommyKent
Wed Nov 28, 2018 8:17 pm
Forum: Volvo S80 Forum - First Generation 1999-2006
Topic: Idler Pulley Removal
Replies: 5
Views: 730
Romania

Re: Idler Pulley Removal

It`s easier to cut the head of the bolt with a small hacksaw ( it`s mild steel ) then you can get the bolt out and the pulley. Then enlarge the hole your tool of choice. I used a small air angle grinder with a rotary file bit. You could use a file.
by ThommyKent
Thu Aug 02, 2018 1:00 am
Forum: Volvo V70, XC70 Forum 2008+
S80 Forum 2007-2016
Topic: Motor Seized? Next steps?
Replies: 36
Views: 1634
Romania

Re: Motor Seized? Next steps?

Poor car died from neglect. It`s done. Buy a Prius
by ThommyKent
Sat Jun 16, 2018 12:50 pm
Forum: Volvo V70, XC70 Forum 2008+
S80 Forum 2007-2016
Topic: Volvo S80 V8 2008 CV boot squeaking?
Replies: 17
Views: 797
Romania

Re: Volvo S80 V8 2008 CV boot squeaking?

Any roughness is not acceptable, that`s a sure sign of needing replacement. A lighty loaded bearing will squeal when dry. The driveshaft bearing in my old 240 squealed so bad it would draw the attention of pedestrians. I'm guessing these will start squealing just prior to seizing? Usually they just...
by ThommyKent
Sat Jun 16, 2018 1:28 am
Forum: Volvo V70, XC70 Forum 2008+
S80 Forum 2007-2016
Topic: Volvo S80 V8 2008 CV boot squeaking?
Replies: 17
Views: 797
Romania

Re: Volvo S80 V8 2008 CV boot squeaking?

Any roughness is not acceptable, that`s a sure sign of needing replacement. A lighty loaded bearing will squeal when dry. The driveshaft bearing in my old 240 squealed so bad it would draw the attention of pedestrians.
by ThommyKent
Fri Jun 15, 2018 4:56 pm
Forum: Volvo V70, XC70 Forum 2008+
S80 Forum 2007-2016
Topic: Volvo S80 V8 2008 CV boot squeaking?
Replies: 17
Views: 797
Romania

Re: Volvo S80 V8 2008 CV boot squeaking?

That definitely sounds like bearing.
by ThommyKent
Fri Jun 15, 2018 2:41 am
Forum: Volvo V70, XC70 Forum 2008+
S80 Forum 2007-2016
Topic: Volvo S80 V8 2008 CV boot squeaking?
Replies: 17
Views: 797
Romania

Re: Volvo S80 V8 2008 CV boot squeaking?

Hard to define a rubbery squeak.
by ThommyKent
Wed Jun 13, 2018 4:43 pm
Forum: Volvo V70, XC70 Forum 2008+
S80 Forum 2007-2016
Topic: Volvo S80 V8 2008 CV boot squeaking?
Replies: 17
Views: 797
Romania

Re: Volvo S80 V8 2008 CV boot squeaking?

The boot rotates with the axle, not sure it could squeak. My guess would be bearing.
by ThommyKent
Mon Jun 11, 2018 3:05 pm
Forum: Volvo V70, XC70 Forum 2008+
S80 Forum 2007-2016
Topic: 2008 S80 axle, keep getting the wrong one Topic is solved
Replies: 15
Views: 842
Romania

Re: 2008 S80 axle, keep getting the wrong one Topic is solved

Yup, it`s always a struggle pushing the lower control down far enough to fit the ball joint. Use whatever works. I used ratchet straps, but I wouldn`t again
by ThommyKent
Sun Jun 03, 2018 4:28 pm
Forum: Volvo V70, XC70 Forum 2008+
S80 Forum 2007-2016
Topic: 2008 S80 axle, keep getting the wrong one Topic is solved
Replies: 15
Views: 842
Romania

Re: 2008 S80 axle, keep getting the wrong one Topic is solved

The V8 and T6 have the same part numbers. The 3.2 is different. Something tells me if you order a T6 or V8 axle it will be what you need https://www.tascaparts.com/auto-parts/2008/volvo/s80/t6-trim/3-0l-l6-gas-engine/front-drive-axle-cat/axle-shafts-and-joints-scat https://www.tascaparts.com/auto-pa...
by ThommyKent
Tue May 22, 2018 3:37 pm
Forum: Volvo S80 Forum - First Generation 1999-2006
Topic: 2000 S80 - Driver side control arm
Replies: 10
Views: 1373
Romania

Re: 2000 S80 - Driver side control arm

I just cut slots out of the subframe flange that get`s in the way of accessing the bolt heads. Then you need a closed end wrench with O degree offset and thin like these wrench`s. I just happen to have. Expensive if you don`t. http://dwtool.com/product/0-degree-6pcs-extra-long-offset-box-end-wrench-...