I experienced the exact same problem (new PCV, used the bigger hose upgrade, slightly enlarged the PTC ports and thoroughly cleaned it), everything was fine for 5k miles, then it blew both rear cam seals. There's suction @ the oil cap, and nothing out the dipstick. I replaced with 2 new cam seals, a...

there's a rebuild kit available? awesome!!! details please

hello everyone, I've got the occasional arrow and 3rd gear start issue which goes away after I restart the car. got a PNP from a low mileage 2000 S70 to replace my existing one (1995) They were different! this specific 2000 S70 PNP was a tiny bit thinner, and it physically interfered with one of the...

will give it a try. Thank you Lee

hello folks, The cloth cover on my sunroof cover is peeling. I have removed the cloth, and now I have the cardboard sunroof cover exposed. To remove it, I believe I'd have to tilt the sunroof and remove the 6 hex bolts (3 on each side), remove the glass, and remove the cover ... Here's the issue: I ...

I appreciate the response everyone, thank you I replaced the filter and gave the old one to the local lube place for proper disposal the ticking noise is there but on closer inspection, it appears to originate from the injector area and not the valve cover (used a scope to listen). The valvetrain is...

just to recap, this is assuming that I do not drain the oil in the oil pan, and just remove the oil filter (while there's oil in the pan still) .. will there be a lot of spill, or is all the oil held in the pan, lower than the filter housing, and therefore no risk of spilling?

Hi everyone, long time reader, first time poster.. great forum :) I am trying to diagnose a constant lifter tick (warm or cold), and before I pull the oil pan and replace the o rings, I figured I keep it simple and start with the basics. I have read posts on how non-original oil filters may cause li...