do you have a link to that thread?
john

Yesterday I let it idle for about 10 minutes, turned it off and then checked the oil right away and there were bubbles on the dip stick. I had read this indicates that the o-rings are bad. I should say now that at no time did the oil pressure light and warning come on during this. So I decided to re...

In another thread I asked about P0026 and P0027 codes on my wife's 2005 xc70 with 89k. I fixed that by cleaning the valve solenoids and putting on new gaskets. The screen on the exhaust gasket looked to be a little clogged. I also did an oil change at the same time. This was this morning. This after...

My wife's 2005 XC70 (89k) had the CEL come on so I pulled the codes and they turned out to be P0026 and P0027. Intake and exhaust control solenoids. It ran normally. I cleared the codes and the next day I took it for a test run, about 3 miles, to see if they would return. They did, only this time wh...

i've seen some of the youtube stuff it is really helpful. would it be better to get an old pc laptop as a dedicated machine or will the software run correctly on a mac (not dedicated) with virtualbox?

i've had my 2001 xc70 for a few years now and up until now i haven't felt the need to get a vida/dice but lately my transmission has been giving me harder than normal shifts (only when hot). i am going to do a fluid change along with a magnefine filter and auxiliary trans cooler in hopes it will wor...